5801754016 NOX SENSOR
5801754016 NOX SENSOR
In stock
Stock por almacén
IVECO NOx SENSOR
🔧 What is the NOx sensor?
The NOx sensor measures the concentration of nitrogen oxides (NO and NO₂) in the exhaust gases. These gases are highly polluting and must be reduced using the SCR (Selective Catalytic Reduction) system with AdBlue.
⚙️ How does it work?
-
The sensor is placed in the exhaust system, before or after the SCR catalyst.
-
The gas passes through an electrochemical cell in the sensor.
-
This analyzes the amount of NOx present and generates an electrical signal proportional to it.
-
The engine or aftertreatment ECU (ECM in IVECO) receives the signal and:
-
Adjusts the AdBlue dosing.
-
Monitors the efficiency of the SCR system.
-
Detects possible failures in the aftertreatment system.
-
📍 Where is it located?
There are normally two NOx sensors in Euro 6 IVECO trucks:
| Sensor | Location | Main function |
|---|---|---|
| NOx 1 (Upstream) | Before the SCR | Measures the NOx generated by the engine |
| NOx 2 (Downstream) | After the SCR | Verifies that the catalyst reduces NOx |
📈 Typical NOx values (indicative)
| Engine state | NOx (ppm) before the SCR | NOx after the SCR |
|---|---|---|
| Idle | 100 - 300 ppm | 10 - 50 ppm |
| Acceleration | 500 - 1200+ ppm | 100 - 200 ppm (working correctly) |
🧠 What does it control?
-
AdBlue dosing: if the sensor detects high NOx → more AdBlue.
-
Component protection: if it detects failures, it can limit engine torque.
-
Catalyst diagnosis: if the sensor after the SCR detects too much NOx → catalyst inefficiency.
🚨 Symptoms of NOx sensor failure
-
Engine warning light (Check Engine) on.
-
Messages such as:
❗ “Emissions system failure”
❗ “Engine torque reduced at XXX km” -
Abnormal AdBlue consumption.
-
DPF regeneration failure (in integrated systems).
-
Engine limp mode (limited power).
🛠️ Diagnosis and common codes
With IVECO EASY, Jaltest or TEXA diagnostics, you can:
-
View live NOx values (ppm).
-
Force sensor auto-adjustment (calibration).
-
View errors such as:
| Code | Description |
|---|---|
| P2200 | NOx sensor, incorrect signal |
| P2201 | NOx sensor, defective circuit |
| P2202 | Low NOx sensor signal |
| P20EE | SCR catalyst inefficiency |
| P229F | Excessive difference between NOx sensor 1 and 2 |
🔧 Can it be cleaned or repaired?
-
The NOx sensor is not repairable nor is cleaning recommended.
-
It is a heated electronic component (it needs preheating to work).
-
If it fails → it must be completely replaced.
🧪 Quick test with diagnostics:
-
Verify that:
-
The ppm values vary according to the engine load.
-
The difference between NOx before and after the SCR is significant (the catalyst is working).
-
-
If it remains fixed or out of range → it is failing.
Couldn't load pickup availability
Don't miss out on this limited-time offer designed for you
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


